Smart Man-Machine Interface (Smmi); Controller - Sunrise Medical Quickie Attitude Directions For Use Manual

3.0 smart Man-Machine Interface (sMMI)

Controller:

The controller fitted to the handlebar of your Pedelec is used to
access menus and activate functions in the sMMI. The following
functions are stored:
Button 1 = UP (one step upwards)
Button 2 = confirm menu key or selection
Button 3 = DOWN (one step downwards).
Interface:
The sMMI is fitted to the handlebar or stem of your Pedelec.
Using the controller's buttons, (Fig.3.1), you can access various
functions and activate or deactivate parameters.
For some functions you can also permanently store various
parameters in the software of the sMMI (see section "Firmware
Updates").
Please contact your specialist dealer in this regard, they will be
happy to advise.
The following provides an overview of the menu structure of the
sMMI:
Start Symbol Display
Start
Activate Assistance Level
Activate Recuperation
Activate Pushing Aid
Activate Speed
Activate Remaining Range
Activate Remaining Energy
Activate Travel Information
Activate Warning Symbols
•
28
Transfer Software Updates to the Motor
Back
Back
Switch Off
Menu
Tour Reset
Travel Mode
Braking
Assistant
Pushing Aid
Settings
Fig.3.1
1
2
3
NOTE:
• Short-cut : Activating the Pushing Aid: push up button (1)
for 2 seconds.
• Short-cut: Tour reset: push down button (3) for 2 seconds.
O.K
Boost
Tour
Eco.
On
Off Speed Selection
On
Off
Back
Easy Dispay
On / Off
Date
Year / Month / Day
Time
Hour / Minute
Language
DE / GB / FR / NL
Units
Kilometers / Miles
Information
Software status sMMI, Motor, Battery
Attitude/Attitude Hybrid Rev.3.0