Detaching The Battery; Switching Off The Battery; Disconnecting The Cable; Removing The Battery - Sunrise Medical Quickie Attitude Directions For Use Manual

Hide thumbs Also See for Quickie Attitude:
Table of Contents

Advertisement

Available languages

Available languages

Detaching the battery:

Switching off the battery:

The battery is switched off using the sMMI controller (see the
sMMI and motor operating manual). This puts the battery
initially in Active mode for 48 hours. This means that, within this
period, the sMMI can be reactivated at any time without having
to first switch on the battery. The power required for this is
minimal.

Disconnecting the cable:

•• Disconnect the add-on bike on the sMMI.
•• Then remove the plug of the motor cable [7] from of the
socket [3].
CAUTION!
Ensure that the plug of the motor cable [7] does not come into
contact with any metallic particles when being set down (risk of
contamination).

Removing the battery:

•• Insert the key [2] in the lock on the battery [1].
•• Carefully turn the key [2] anticlockwise until it stops. The lock
is now released, the
key can no longer be removed from the battery.
•• Pull the battery [1] upwards about 20.0 mm along the slide rail
[6] and then remove it
completely.
•• Store the battery in a clean place.
CAUTION!
Ensure that the socket [3] does not come into contact with any
metal
Attitude/Attitude Hybrid Rev.3.0
Fig.7.5
Fig.7.6
7
Fig.7.7
3
6
3
2
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quickie attitude juniorQuickie attitude hybrid

Table of Contents