Docking: Fig.6.6 - Fig.6.10 - Sunrise Medical Quickie Attitude Directions For Use Manual

De-Docking: Fig.6.6 - Fig.6.10
WARNING!
The de-docking procedure should take place on an even
surface.
NOTE: De-docking follows the opposite sequence as described
for Docking.
• Lock the wheelchair brakes.
• Open the red locking levers, A.
• Push the add-on bike forward/upwards until the upper
docking connector has no contact with the front frame of
your wheelchair, B.
• Swing the upper docking connector upwards, C.
• Lower the add-on bike until the stand wheels and castors
have contact to the ground.
• Pull the red release lever by the handgrip, D.
• Pull the add-on bike downwards towards yourself until the
docking pins are totally disengaged.
• Hold this position and push the add-on bike forward so that
it is clear of your wheelchair, E.
Fig.6.6
14
A
Fig.6.7
Fig.6.8
Fig.6.9
Fig.6.10
B
C
D
E
Attitude/Attitude Hybrid Rev.3.0