Disassembly
Fig. 1
Preparations
•
Position the basic unit in the room so that it can be accessed from all sides.
•
Lock the foot brake.
•
Push the squared timber underneath the basic unit as indicated by the arrow in Fig. 1 to
prevent the basic unit from tilting back after removing the POWERPHOS and the X-ray
image intensifier.
•
Switch the POWERMOBIL on, and move the lifting column to its approximate vertical
center position.
•
Switch the POWERMOBIL off again, and unplug the monitor cable X10 plug from the ba-
sic unit.
•
Unplug the monitor cart's power plug to completely disconnect the monitor cart from the
power supply.
Siemens AG
Medical Solutions
Fig. 2
SPR2-240.841.01
Rev. 01
05.03
2
Page 1 of 12
CS PS 24
2 - 1
2
POWERMOBIL