Line Sewing - Brother PE-DESIGN V7 Instruction Manual

Manually Creating Embroidery Patterns From Images (Design Center)
I

Line sewing

Applying sewing attributes to the entire
outline
1.
Click on the Tool Box.
→ The shape of the pointer changes to
, and the Sewing Attributes bar
appears similar to the one shown below.
2.
If necessary, change the color and sew type.
b
Memo:
• You can change the color and sew type
either before or after applying sewing
attributes to the outline. For more details on
changing these settings, refer to "Color" on
page 215 and "Sew type" on page 215.
• You can also use the settings in the Sewing
Attribute Setting dialog box to define other
attributes of the sew type. (For more details,
refer to "Specifying sewing attributes" on
page 216.) If you do not change these
settings at this time, the current settings will
be applied, however you can modify them
later.
211
3.
Click the outline where you want to apply the
sewing attributes.
→ "Marching lines" appear along the
selected outline, and the color and sew
type selected on the Sewing Attributes
bar are applied to the outline.
Applying sewing attributes to a portion of
the outline
1.
Click on the Tool Box.
→ The shape of the pointer changes to
, and the Sewing Attributes bar
appears similar to the one shown below.
2.
If necessary, change the color and sew type.