Using The Created Font Characters - Brother PE-DESIGN V7 Instruction Manual

5
Save the font character pattern.
Click File, then Save.
Select the drive and folder, and then type in
the file name. For this example, type in the
name "My font1".
a
Note:
• Save the font created in the location below.
The font will not be usable in the Layout &
Editing if it's stored in a different folder.
(Drive where PE-DESIGN was installed)
\Program Files\Brother\PE-DESIGN
Ver7\My font
• If Layout & Editing has already started up
when a new character is saved in Font
Creator, that character will not appear in
the Font selector list in Layout & Editing. In
this case, exit Layout & Editing, and then
start it up again.
Click Save.
305
Tutorial (Advanced)
Step 5
The created font characters can be used in Layout
& Editing.
1
Start up Layout & Editing.
Click
then PE-DESIGN Ver7, then Layout &
Editing.
2
Use the created font and type in text.
Click
Click in the Font selector, and then select
"My font1".
Creating an embroidery pattern

using the created font characters

, then select All Programs,
, and then click .