Brother PE-DESIGN V7 Instruction Manual page 35

Drag the handles to adjust the mask to the
desired size.
Move the pointer inside the mask, drag the mask
to the desired position, and then click Next.
29
Tutorial
Check the preview of the area to be converted,
and then click Next.
b
Memo:
Areas not set to be sewn are shown filled with
a crosshatch pattern.
3
Convert the image to an embroidery pattern.
Click Select from Candidates....
b
Memo:
While converting an image into an embroidery
pattern, various changes can be specified
manually. (For more details, refer to page 84.)
→ There are six patterns with different
brightness and contrasts based on the
original image. The image showing the
current settings is selected in the Select
from Candidates dialog box.