Step2 [Case 3] Reshaping A Single Line To Create Custom Stitch Patterns (Motif Mode) - Brother PE-DESIGN V7 Instruction Manual

Step 2 [Case 3] Reshaping a single line to create
custom stitch patterns (Motif mode)
In Motif mode, you can create original stitch patterns
by changing the shape of a single line. These stitch
patterns can be applied in line sewing and region
sewing in Layout & Editing, and region sewing in
Design Center.
1
Switch to Motif mode.
Click Mode, then Motif.
2
Create the pattern.
Click .
Click the base line between the start point
(blue square) and end point (red square).
311
Tutorial (Advanced)
Drag the point that you want to move to a new
position.
The line that moves turns pink when moving a
point.
b
• To move the point horizontally or vertically,
• Pressing the arrow keys moves the
• To delete a selected point, press the
→ A block square appears.
Memo:
hold down the Shift key while dragging it.
selected point one grid mark in the direction
of the arrow on the key. If the grid is not
displayed, the pattern moves a distance
smaller than the smallest grid interval in the
direction of the arrow on the key.
Delete key.