Selecting The Character To Be Created - Brother PE-DESIGN V7 Instruction Manual

Selecting the Character To Be Created

The character to be created can be selected.
1.
Click the Select Character button in the
Select Character bar.
In the Select Character dialog box that
appeared, select the character to be created.
b
Memo:
• Characters where pattern has already been
created appear with a blue background.
• To return to the Design Page without
selecting a character, click outside of the
Select Character dialog box.
• If "space" in the upper-left corner of the
Select Character dialog box is selected,
"SPACE" appears in the Select Character
bar.
a
Note:
If any part of the character pattern extends
off the Design Page when a different
character is selected, a message appears.
Before selecting a different character, edit
the character pattern so that no part extends
off the Design Page.
241
Creating Custom Fonts (Font Creator)