Specifying Text Attributes - Brother PE-DESIGN V7 Instruction Manual

Arranging Embroidery Designs (Layout & Editing)
b
Memo:
• To select all characters between the
selected character and the next character
selected, hold down the
clicking the next character.
• To select an additional character in the
direction of the last character, hold down
the key and press the
Shift
To select an additional character in the
direction of the first character, hold down
the key and press the
Shift
Holding down the
the opposite arrow key deselects the
character.
• To deselect the current character and select
the following character in the direction of the
last character, hold down the
→ or ↓ key. To deselect the
and press the
current character and select the following
character in the direction of the first
character, hold down the
← or ↑ key.
press the
5.
Change the font, size, color, sew type and
other attributes.
b
Memo:
With TrueType fonts, the outline can be set to
be sewn or not, and settings can be selected
for the color and sew type.

Specifying text attributes

key while
Shift
→ or ↓ key.
← or ↑ key.
key and pressing
Shift
Ctrl key
key and
Ctrl
Various character attributes for text can be set in the
Text Attribute Setting dialog box.
Toolbar button:
1.
Select the text that you want to edit.
2.
Click , or click Text, then Text Attribute
Setting.
→ The Text Attribute Setting dialog box
appears.
3.
If necessary, change the text attributes.
b
Memo:
To return a parameter to its default setting,
click beside it.
4.
Click Apply to apply the effect of the setting.
b
Memo:
To close the dialog box, click Close.
Sets the spacing
between individual
characters.
Kerning
Range: -100 to 100 mm
(-3.94 to 3.94 inches)
Default: 0
Moves the text vertically.
Vertical Range: -100 to 100 mm
Offset (-3.94 to 3.94 inches)
Default: 0
0.0 mm
5.0 mm
(between "A"
and "b")
0.0 mm
2.0 mm
132