Brother PE-DESIGN V7 Instruction Manual page 235

Manually Creating Embroidery Patterns From Images (Design Center)
6.
Click the desired locations within the region
where you want to apply the stamp.
→ The stamps appear as dotted lines in the
region.
b
Memo:
• The whole stamp appears, even if it is larger
than the region that it has been applied to,
however, only the parts that are enclosed
within the region will be sewn.
• Stamps can only be applied to regions that
have the satin stitch, fill stitch and
programmable fill stitch applied.
• To apply several stamps within the same
region, continue clicking the region as often
as needed.
• If the pointer cannot fit within the selected
region, the stamp cannot be applied.
• The Stamp Attribute Setting dialog box
appears only after a stamp tool is selected.
• Stamps are only sewn within the region that
they have been applied to.
• The size of stamps may change when they
are imported into Layout & Editing if the size
of the design has been changed with the
Magnification setting in the Import size
dialog box.
I
Editing a stamp
1.
Click on the Tool Box.
→ The shape of the pointer changes to
, the Stamp Attribute Setting
dialog box appears, and stamps that have
been applied are indicated by pink dotted
lines.
229
b
Memo:
If a region was already selected, "marching
lines" appear around the region, and its
stamps are indicated by dotted lines.
2.
Click the region with the stamp that you want
to edit.
→ "Marching lines" appear around the
selected region.
3.
Click the stamp that you want to edit.
→ Round handles appear around the stamp,
and a rotation handle appears at the top of
the stamp.
a
Note:
Only one stamp can be selected at a time. If
you select another stamp, the previously
selected stamp becomes deselected.
4.
To change the stamp pattern, select a
different pattern in the Stamp Attribute
Setting dialog box, and then click Apply.
To change the stamp size and orientation,
specify the desired settings in the Stamp
Attribute Setting dialog, or adjust it by
dragging the handles or rotation handle.
To move a stamp, drag it to another location
within the region or partially positioned on the
region.
To delete the stamp, select the menu
command Edit – Delete, or press the
Delete
key.
b
Memo:
• Stamps appear only after a stamp tool is
selected.
• Stamps are only sewn within the region that
they have been applied to.
• To close the dialog box, click Close.
c
"Reshaping outlines" on page 205
Rotation handle
Handles