Brother PE-DESIGN V7 Instruction Manual page 164

Arranging Embroidery Designs (Layout & Editing)
Pull Compensation
Width (horizontal length)
Height (vertical length)
Direction
Offset
Programmable
fill
Base
Sewing
Specifies
the base
stitching.
Pattern
Lengthens the sewing region in the stitch pattern's sewing direction to prevent pattern shrink-
age during sewing.
Range: 2.0–10.0 mm (0.08–0.39 inch)
Default: 0.0 mm (0.00 inch)
Select a pattern for programmable fill stitch.
Click , and then, in the Browse dialog box that appeared, select the folder
containing the .pas file that you want to use. Double-click the desired pattern, or
select it, and then click OK.
Sets the programmable fill pattern width.
Range: 5.0–10.0 mm (0.20–0.39 inch)
Default: 7.5 mm (0.30 inch)
Sets the programmable fill pattern height.
Range: 5.0–10.0 mm (0.20–0.39 inch)
Default: 7.5 mm (0.30 inch)
Allows you to rotate the angle of the programmable
fill patterns.
Range: 0–359 degrees
Default: 0 degrees
Sets the direction of the offset as row/column.
Direction
When the pattern's arrangement is offset, sets the amount of offset.
Value Range: 0–99%
Default: 0%
Specifies the shape of stitching on the edges.
Available only when the Base Sewing check box
is selected.
Stitch
Available settings:
Type
Default: (for all objects other than text)
(for text)
Sets the pitch of the stitching for the base of a programmable fill stitch.
Available only when the Base Sewing check box is
selected.
Step Pitch
Range: 1.0–10.0 mm (0.04–0.39 inch)
Default: 4.0 mm (0.16 inch)
Sets the spacial frequency steps of the stitching for the base of a programmable
fill stitch.
Available only when the Base Sewing check box is
Frequency
selected.
Range: 0–99%
Default: 30%
,
The stitching for the base (area
other than the pattern indicated
by the diagonal lines) of the
programmable fill stitch can be
set.
The pattern is sewn with the
specified stitching.
90°
45°
135°
180°
0°
225° 315°
270°
row
column
Step pitch:
0%
30%
158