Step3 Creating A Font Character Pattern; Patterns - Brother PE-DESIGN V7 Instruction Manual

b
Memo:
• When characters created with Font Creator
are imported into Layout & Editing, the
width and height of the characters will be in
the following area.
• Character width: from Set Line (A) to
Set Line (B)
• Character height: from Base Line (C)
to Capital Line (D)
(A) Set Line (B) Set Line
• You can use drag operations to change
positions of lines by dragging the right edge
or bottom edge (triangle icon) other
than Base Line and Capital Line.
(A) Set Line (B) Set Line
• The Capital Line (D) and the Base Line
(C), which are the references for the
character height, are fixed.
• The character width, indicated by the Set
Lines (A and B), can be set separately for
each character.
Tutorial (Advanced)
Move the pointer over the selected image, and
then drag the image to the desired position.
Capital Line
(D)
Base Line
(C)
Step 3
In this example, we will trace a background image
to create a font character pattern.
1
Select the character to be created.
Capital Line
(D)
Base Line
(C)
Triangle icon
Click the Select character button, and then
select the character to be created. For this
example, select "T".
b
Memo:
The shape of the pointer changes to
when the image can be moved.
Creating a font character
pattern
b
Memo:
The character must be registered in the
Select Character table in order for the
created font to be used in Layout & Editing.
298