Advertisement
To Load the Pump Tubing
To Prime the Tubing
1. Make sure tubing is disconnected from the patient.
2. Fill the bag with the enteral formula.
3. Press
PRIME PUMP
4. Press
AUTO PRIME
5. or Press and hold
6. Press
7. The tubing should be filled to the end with formula.
To Start feeds – Press
To Temporarily Stop the Pump Press
1. Open the door of the pump.
2. Hold the tubing by the finger tab.
3. Place the Valve into the Valve Slot holding the finger
facing up.
4. Stretch the tubing around the Rotor.
5. Set the Black Ring Retainer in the Retainer Slot.
6. Close door of pump.
Finger tab/Valve
.
.
.
HOLD TO PRIME
RUN
HOLD
Black Ring Retainer
Valve Slot
Retainer Slot
Rotor
tab
Advertisement
