Cardinal Health Kangaroo Connect Enteral Feeding Pump Quick Start Directions

Cardinal Health™
Kangaroo™ Connect
Enteral Feeding Pump
Quick start directions
Pump overview
1
2
Set up the pump
1
1. Press the power button.
Prime the pump
1
1. Select Priming mode.
4
3
2
2. Load set by inserting
from the bottom and
snapping into place.
2
2. If you selected
Auto Prime, wait.
1. Soft keys
Press a key to select the option that
appears next to it on the screen.
2. Power button
Press once to power on.
Press and hold to power off.
3. Power source
A green light shines when the pump
is connected to AC power.
4. Pump status
= Warning alarm
= Notice or caution alarm
= Standby or feeding
3
3. Select Prime.
3
3. If you selected Hold
To Prime, press and hold
Prime Feed until fluid
reaches end of tubing.