Cardinal Health Kangaroo Connect Enteral Feeding Pump Directions For Use

Kangaroo™ Connect Enteral Feeding Pump
"Dose Feeding"
Directions for use

Battery Operation

Unplugging the pump from the AC line will automatically place the pump on battery power. To recharge
the battery, plug the pump into an AC wall outlet. Pump will automatically begin charging.
Select Dose Feeding (if not yet activated on the pump)
"BIOTECH MODE"
1. Access
press and release the
2. The screen will change to purple, with the title
}
3. "View Options".
Select
4. To return to normal pump operation, restart the pump in the normal manner.

Prepare to Feed

1. Fill or spike feeding container prior to setting up pump.
2. Turn pump on – Press
In order to achieve proper accuracy, the fluid line in the feeding set bag must be
3.
10 inches above the top of the feeding pump, when initiating the feeding cycle.
}
"Keep Settings" or
4. Select
}
regimen the
5. Load the cassette portion of the feeding set onto the pump, following the animated instructions on
the screen. Insert from the bottom and snap into place.

Prime and Program the Pump

}
"Prime Pump"
1. Press
}
"Auto Prime"
2. Press
}
"Done"
3. Press
}
"Adjust Feed"
4. Press
}
"Adjust Dose"
5. Press
}
"Done
6. Press
Pump sets should not be reused after
For more information or to order, please contact
your sales representative, call
cardinalhealth.com/kangaroo
or visit
by turning on the pump; and
}
upper left button.
}
"Dose".
Select
Power
button.
}
"Clear Settings"
"Keep Settings"
option should be selected).
to access the pump priming options.
or "Hold to Prime Feed" to complete priming of the feeding line
"Adjust Rate"
. Press >
to set the amount of feeding solution to be delivered.
}
"Start"
" and Press
24 hours
877.CARDINAL
while the animation of the kangaroo is moving,
"BIOTECH MODE".
}
"Back".
Select Select
(for day to day use with the same feeding
to set the feed rate.
when ready to begin feeding.
of initial usage.
}
"Restart Pump"