Moving In A Track /78 - MIXVIBES CROSS DJ User Manual

media. to activate Vinyl mode you can use the Vinyl button available on both con-
trollers as well, or use the (V) key, to toggle the Vinyl mode of the active player.
more player related settings can be found on the General tab and on the Display
tab of the Preferences dialog.
Lead In/Lead Out
to set the length of the lead In and the lead out marker.
End of Track Alarm use this slider on the Display tab to set the remaining play
time of a track, during which the full track display shall blink red to warn you, that
you will soon reach the end of the track.
7.10 Moving in a Track
you have several options to change the playback position of a track:
•
click into the waveform or into the full track display. playback continues from
where you clicked.
•
use the jogwheel of u-mIX control pro/u-mIX control 2 to seek through
the track as long as the track is not playing. Holding the SHIft button on the
controller seeks through the track at a higher speed.
you can use the Smart Seek controls to perform a beat jump forward in a track.
the Smart Seek controls reside in the transport section of the players. click the
Smart Seek Length indicator to select the seek length (in beats or fractions of a
beat). then click either on Smart Seek Backward or on Smart Seek Forward.
Smart Seek Length
Smart Seek Backward Smart Seek Forward
the Smart Seek actions can be performed with the keyboard and with u-mIX con-
trol pro/u-mIX control 2 as well:
use the two sliders Lead In and Lead Out on the General tab
Importing and Mixing your Music
78