ResMed HumidAire 2i User Manual page 5

Hide thumbs Also See for HumidAire 2i:
Table of Contents

Advertisement

The water chamber should not be connected to the docking station when
transporting the HumidAire 2i in the carry bag. Place the water chamber in a
separate compartment in the carry bag.
Make sure that the water chamber is empty and thoroughly dried before
transporting the HumidAire 2i.
Do not operate the HumidAire 2i if the CPAP , APAP , or bilevel device has a
damaged power cord or plug.
There exists the possibility that if the device is placed above the level of the
patient and is tipped over, or if the tubing is filled with condensate, the mask
might fill with water. The HumidAire 2i should therefore be used with caution
in patients who are unable to guard their airway, or are unable to pull the
mask off, for example following a stroke. Attention should be given to the
relative risks and benefits.
Do not operate the HumidAire 2i if it is not working properly or if any part of it
has been dropped or damaged.
Keep the power cord away from heated surfaces.
Do not drop or insert any object into any opening or tubes.
Do not use the HumidAire 2i in the presence of flammable or explosive
materials.
Medical Information
3

Advertisement

Table of Contents
loading

Table of Contents