Table of Contents
Advertisement
5
Disassembling the Water Chamber
1. To open the side catches pull out from the lower edge.
2. Hold the water chamber as shown below:
3. Separate the water chamber by pulling the two halves apart. Use your thumb
to pull down on the front tab.
4. Remove the seal by peeling it away from the inside of the lid.
5. Remove the cross-member from the water chamber base.
6
Discard any remaining water.
The tub plate does not need to be removed from the water chamber base. If
removed, replace the tub plate by:
1. Turning the water chamber base upside down.
14
Front tab
Side catch
Front tab
Lid
Seal
Cross-member
Base
Advertisement
Table of Contents
