7
Carefully, slide and push the filled water chamber onto the humidifier docking
station (already attached to the CPAP, APAP, or bilevel device) until it clicks down
into place. Ensure that the water chamber is fully engaged.
WARNING
!
Always connect the HumidAire 2i docking station before connecting the
•
water chamber.
To prevent water from entering the CPAP , APAP , or bilevel device, only
•
move or transport it with the HumidAire 2i attached if the water chamber
is empty and thoroughly dry.
8
Connect one end of the air tubing firmly onto the air outlet on the water chamber
and the other end to the mask system.
The HumidAire 2i is now ready for use. To start treatment, see "Operating
Instructions" on page 9.
8
Docking
station
Water
chamber
Mask system
Air outlet
Air tubing