2
Separate the HumidAire 2i water chamber from the docking station. To do this,
lift the latch at the bottom of the water chamber and pull the water chamber
away from the docking station.
3
Slide the humidifier docking station (with the water chamber detached) onto the
device until it clicks into place.
Notes
The images in this manual are for illustrative purposes only and may look
•
different from your model.
Under normal operation, there is no need to remove the HumidAire 2i
•
docking station once it is attached to the CPAP , APAP , or bilevel device. If you
need to remove it, press the latch underneath the docking station and pull it
away from the device.
When removing the docking station, ensure that the water chamber is
•
removed first.
4
Insert the power cord into the socket at the rear of the device. Plug the other end
of the power cord into a power outlet.
6
Power
cord
Docking station
To
power
outlet