System Settings Menu - XIEGU X5105 Operation Manual

System parameters may be changed to suit your operating preferences.
1. HOLD [MENU] to enter System Settings Menu.
2. TAP [<] or [>] Softkey to display the menu items you want to adjust.
3. Rotate [[KNOB]] to set parameter value.
4. TAP [SAVE] to save current settings and exit menu mode.
5. TAP [QUIT] at any time to exit menu mode without saving.
Items
LCD Backlight
LCD Contrast
BEEP Volume
Side Tone Volume
Key BEEP
AM Mod Level
Band Stack Mode
MIC Bias
Charger
IF Output
RSSI Scale
User Key F1
User Key F2
The ACC accessory interface (8-pin DIN) of the X5105 provides a voltage unique to each band. The pin is
labeled BAND and the voltage can be used to control peripheral equipment.
Xiegu X5105 Operating Manual 18

System Settings Menu

Descriptions of System Menu
Number Description
#1 Displayer backlight brightness
#2 Displayer contrast ratio
#3 System prompt volume
#4 Side Tone Volume Level
#5 Key BEEP OFF/ON
#6 AM Modulation Level
#7 Band Up/Dn step mode
#8 MIC Bias OFF/ON
#9 Charger OFF/ON
#10 IF Output OFF/ON
#11 S Meter Calibration
#12 Hand Microphone F1 key
#13 Hand Microphone F2 key
Band Voltage Data
Band
1.8MHz 230mV
7MHz 920mV
18MHz 1610mV
28MHz 2300mV
3.5MHz 460mV
10MHz 1150mV
21MHz 1840mV
50MHz 2530mV
5.0MHz 690mV
14MHz 1380mV
24MHz 2070mV
Range
OFF to LEVEL5
0 to 30
0 to 100
0 to 100
OFF/ON
0 to 63
Ham/Full
OFF/ON
OFF/ON
OFF/ON
-100 to +100
LEFT
RIGHT
Volts
Default
LEVEL5
30
50
50
ON
60
Ham
ON
ON
OFF
0
LEFT
RIGHT