System Menu Operation - XIEGU X5105 Instruction Manual

E. In the channel mode, press the [TAG] button shortly, you can switch between the
channel number /user-defined channel name.
3.26 Boot interface call sign setting
This machine can set up the call sign information displayed on the boot interface, as
follows:
l Press [MENU] button shortly, switch to page 5 menu, select [CSN] function, enter
the call sign editor.
l In the editor, the bottom of the screen to provide text editing tools used, press the
corresponding function button to enable corresponding function.
l After editing, press the [SAVE] button to save the set text and return to normal
operation.
l When you start the machine again, the boot screen will display your edited text
message.

4. System menu operation

The System Settings menu allows you to personalize the transceiver to better suit your
usage habits.
Operation method:
l Press the [MENU] key for 1 second and enter the system settings menu;
l Press the [<] and [>] key buttons below the screen to bring up the menu items you
want to set.
l Press the [<] and [>] button on the board below and rotate the encoder to set the
number you want.
l After setting, press the [YES] button to save the current settings and exit the menu
mode.
*In the fourth step, if the [NO] button is pressed shortly, the new settings will not be
saved and the system menu mode will be exited.
Menu item
01 RF GAIN
CW T/Rx Delay
02 Time
03 CW RX Side Tone
04 Tx AF Gain SSB
05 Tx AF Gain AM
06 Tx AF Gain NFM
07 RX AF Gain SSB
08 RX AF Gain AM
System menu specification
Functional description
Receive RF gain
CW transmit delay
CW receiving side tone
MIC gain in SSB mode
MIC gain in AM mode
MIC gain in NFM mode
SSB mode receiving audio
gain
AM mode receiving audio
gain
Set value Default value
0~100%
0~5000ms
50~1200Hz
0~100%
0~100%
0~100%
10~100%
10~100%
65%
200ms
800Hz
50%
100%
40%
90%
26