Anti-crease
The anti-crease function helps prevent
creasing if laundry is not going to be
removed immediately after the end of
the programme.
The drum continues to turn at intervals
for up to 30 minutes at the end of the
programme. The door can be opened at
any time during the anti-crease phase.
Options
= The anti-crease function is
switched off
= The anti-crease function is
switched on (factory setting)
Low water pressure
If the water pressure is below 100 kPa,
the programme is cancelled and a
fault message appears. If the on-site
water pressure cannot be increased,
activating this setting will prevent the
programme from being cancelled.
Options
= Off (factory setting)
= on
Programmable functions
Backlight brightness
dimmed
The brightness of the dimmed sensors
in the control panel can be selected at
seven different levels.
The brightness will change as soon as a
different setting is chosen.
Options
= darkest level
= brightest level
= (factory setting)
Welcome tone
The welcome tone that sounds when
the washing machine is switched on
can be changed or switched off.
Options
= Off (factory setting)
= normal
= loud
67