Installation Locations; Installation Notes - Miele SmartBiz PWM 300 Operating And Installation Instructions

Hide thumbs Also See for SmartBiz PWM 300:
Table of Contents

Advertisement

Installation locations

Side view
636
1100
Washer-dryer stack
min. 300
This washing machine can be installed
with a Miele tumble dryer on top of it. A
stacking kit (APCL001, optional
accessory) is required for this.
1054
1702
Installation on a raised plinth
The washing machine can be installed
on a steel plinth (open or closed,
available as an optional Miele
accessory) or on a concrete plinth.
Injury can occur if the washing
machine has not been adequately
secured.
When installed on a plinth, there is a
risk that the washing machine will
move and fall from the plinth during
spinning.
Secure the washing machine using
the clamps supplied.

Installation notes

Risk of damage due to moisture
ingress.
Moisture can damage electrical
components.
Do not install the machine near or
directly above an open gully or floor
drain.
Installation
49

Advertisement

Table of Contents
loading

Table of Contents