Table of Contents
Advertisement
5. Starting the programme - the end of the programme
Starting a programme
Touch the flashing Start/Add laundry
sensor.
The door will lock and the programme
will start.
- When the symbol lights up
constantly, the door is locked until
the end of the programme.
If a Delay start time has been selected,
this counts down in the time display. At
the end of the Delay start period or
immediately after the programme has
started, the programme running time
will appear the time display.
Energy savings
After 10 minutes, the indicators will dim.
The Start/Add laundry sensor flashes
slowly.
You can reactivate the indicators:
Touch the Start/Add laundry sensor
(this does not have any effect on a
programme that is running).
At the end of the programme
The time display shows 0:00. The
symbol will remain lit up on the control
panel. The door is locked in the anti-
crease phase.
Touch the Start/Add laundry sensor.
The door will unlock and the symbol
on the control panel goes out.
Pull open the door.
Remove the laundry.
Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Remove all items from the drum.
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Useful tip: For safety reasons, close the
door when the washing machine is not
in use. Otherwise there is a danger of
objects being placed inadvertently in
the drum. If these remain unnoticed and
were washed in the next load, they
could damage the laundry. An open
door is also a danger to pets and
children.
Turn the programme selector to the
position. This switches the
washing machine off.
If applicable, remove the used
capsule from the detergent dispenser
drawer.
Useful tip: Leave the detergent
dispenser drawer slightly open to allow
it to dry.
27
Advertisement
Table of Contents
