Table of Contents
Advertisement
Programmable functions
Reduce temperature
The suds temperature can be reduced
to prevent the suds from boiling too
early in high-altitude locations.
Options
= The Reduce temperature
setting is switched off (factory
setting)
= The Reduce temperature
setting is switched on
Maximum rinse level
The water level in the rinses can be
permanently set to the highest value in
the Cottons and Minimum iron
programmes.
This function is important for allergy
sufferers as it achieves excellent rinse
results. The water consumption will be
increased.
Options
= Maximum rinse level is
switched off (factory setting)
= Maximum rinse level is
switched on
66
Suds cooling
Additional water flows into the drum at
the end of the main wash to cool the
suds down.
Suds cooling takes place when the
Cottons programme with a temperature
of 70°C or higher is selected.
Suds cooling should be activated:
- to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
- where the drainage pipes are rated
less than 70°C.
Options
= Suds cooling is switched off
= Suds cooling is switched on
(factory setting)
Advertisement
Table of Contents
