Control panel switch-off
status
To save energy, the time display and
sensors will go out after 10 minutes,
and only the Start/Add laundry sensor
will flash slowly.
Options
= Off
The time display and sensors
will remain lit up while the
washing machine is switched
on
= On (factory setting)
The time display and sensors
will switch off after 10 minutes
if a programme has started.
However: The time display and
sensors will remain lit up for
10 minutes after a Delay start
time has elapsed, after the end
of a programme, or at the end
of the anti-crease phase.
Programmable functions
Memory
The washing machine will save the
latest settings (temperature, spin
speed) which have been selected for a
programme after the programme has
started.
When the programme is selected again,
the saved settings will appear in the
display.
Options
= Memory is switched off
(factory setting)
= Memory is switched on
Longer pre-wash Cottons
If you require a longer pre-wash you
can extend the pre-wash time.
Options
= No increase in the pre-wash
time (factory setting)
= + 6 minutes increase in the
pre-wash time
= + 9 minutes increase in the
pre-wash time
= + 12 minutes increase in the
pre-wash time
65