Table of Contents
Advertisement
6. Starting the programme – the end of the programme
30
Starting the programme
The programme can be started as soon as the Start/Stop sensor is
flashing on and off.
Touch the Start/Stop sensor control.
The door will lock ( symbol) and the programme will start.
If a delay start period has been selected, this will appear in the dis-
play.
Once the delay start period has elapsed (if applied), the programme
duration will appear in the display; otherwise, the duration will appear
straight away. The programme sequence is also shown in the display.
Tip: You can use the pull-down menu to display the selected temper-
ature, spin speed and any selected Extras.
End of programme
The door remains locked during the anti-crease phase. However, the
washing machine door can be unlocked at any time by touching the
Start/Stop sensor.
Unloading the drum
Pull open the door.
Remove the laundry.
Items left in the drum could discolour other items in the next wash
or become discoloured themselves.
Remove all items from the drum.
Check the door seal for any foreign objects.
Tip: Leave the door slightly open to allow the drum to dry.
Switch the washing machine off with the control.
If applicable, remove the used capsule from the detergent drawer.
Tip: Leave the detergent drawer slightly open to allow it to dry.
Advertisement
Table of Contents
