Starting The Programme - The End Of The Programme - Miele PWM 912 Operating And Installation Instructions

6. Starting the programme - the end of the programme

Starting a programme
The programme can be started once the Start/Stop sensor is flashing
on and off.
Touch the Start/Stop sensor.

The door will lock ( symbol) and the wash programme will start.
If a delay start time has been selected, this will count down in the
display until the programme starts.
At the end of the delay start time or immediately after the programme
has started, the programme duration will appear in the display. The
programme sequence is also shown in the display.
Useful tip: You can use the pull-down menu to display the selected
temperature, spin speed, and any selected Extras.
At the end of the programme
The door remains locked during the anti-crease phase. However, the
door can be unlocked at any time by touching the Start/Stop sensor.
Removing the laundry
Pull open the door.

Remove the laundry.

Items left in the drum could discolour other items in the next wash
or become discoloured themselves.
Remove all items from the drum.
Check the folds in the door seal for any small articles, e.g. buttons,

which might be lodged there.
Useful tip: For safety reasons, close the door when the washing
machine is not in use. Otherwise there is a danger of objects being
placed inadvertently in the drum. If these remain unnoticed and were
washed in the next load, they could damage the laundry. An open
door is also a danger to pets and children.
Switch the washing machine off with the  button.

If applicable, remove the used capsule from the detergent

dispenser drawer.
Useful tip: Leave the detergent dispenser drawer slightly open to
allow it to dry.
31