Replacing A Bj Tank - Canon MultiPASS C755 User Manual

Replacing a BJ Tank

This section describes how to replace a BJ tank in the installed BJ cartridge. Before
replacing BJ tanks, be sure to read the section When to Replace a BJ Cartridge or BJ
Tank . (1 p. 12-7)
n
Do not leave empty BJ tanks in the BJ cartridge. Remove them immediately when they run
out of ink.
Leave the BJ cartridge installed in the MultiPASS and replace a BJ tank as follows:
n
Do not replace BJ tanks while the MultiPASS is printing or performing another operation.
1
Make sure the MultiPASS is plugged in.
2
Open the document tray.
3
Lift the handle to open the printer
cover.
• The cartridge holder automatically moves
to the center of the unit.
c
• Do not try to manually move or stop
the cartridge holder since this may
damage the unit.
• Do not touch the components
shown or any metal parts since this
may adversely affect operation of
the unit and/or affect print quality.
Chapter 12
ROUND
GUIDE RAIL
SHAFT
RIBBON CABLE
Maintenance
HANDLE
12-17