Special Dialing; Dialing Through A Switchboard; Dialing An Overseas Number (With Pauses); Switching Temporarily To Tone Dialing - Canon MultiPASS C755 User Manual

Special Dialing

This section explains special dialing features, such as dialing through a switchboard,
dialing overseas numbers, and switching temporarily to tone dialing.

Dialing Through a Switchboard

A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your MultiPASS
is connected through a PBX or other telephone switching system, you have to dial the
outside line access number first, and then dial the number of the party you are calling.

Dialing an Overseas Number (With Pauses)

When you dial or register an overseas number, you may need to insert a pause within
and/or after the number. The length and location of the pause depends on the
telephone system of your country.
Follow this procedure to dial an overseas number with pauses:
1
Open the document tray.
2
Adjust the document feed lever for the
document you are loading. (2 p. 4-2)
3
Prepare the document and load it, face
down, in the ADF. (2 p. 4-3)
• For color sending, press Color/B&W to
turn on its light. (1 p. 7-2)
• To adjust the resolution and contrast,
1 pp. 7-2, 7-4.
4
Use the numeric buttons to dial the
international access code.
• If you enter the wrong number, press Stop,
then enter the correct number.
• For details on international access codes,
contact your local telephone company.
5
If necessary, press
• A pause entered within a number (p) is two
seconds long.
• For a longer pause, press Redial/Pause again
for another two-second pause. Alternatively,
you can change the length of the pause.
(1 MID PAUSE SET, p. 14-5)
9-2
Special Features
Redial /Pause
to enter a pause.
MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
(Standby to scan)
Ex:
TEL=
Ex:
TEL=
011
011P
Chapter 9