Transporting The Multipass - Canon MultiPASS C755 User Manual

Transporting the MultiPASS

Whenever you plan to transport the MultiPASS, you need to prepare it so it will not be
damaged during the move.
1
Disconnect the power cord.
2
DO NOT remove the BJ cartridge from the MultiPASS. With the cartridge
holder on the right side of the unit, tape the BJ cartridge and cartridge holder
to the side of the unit.
3
Disconnect the telephone, answering machine, or data modem from the
MultiPASS (if connected). (2 p. 2-6)
4
Disconnect the telephone line. (2 p. 2-6)
5
Disconnect the parallel cable or USB cable from the MultiPASS. (2 p. 2-7)
6
Remove the document support. (2 p. 2-5)
7
Remove the output tray. (2 p. 2-5)
8
Make sure the document tray is closed. (You do not need to remove this tray.)
9
Replace all tapes and shipping materials you removed when you first
unpacked the MultiPASS. (2 p. 2-4)
10
Pack the MultiPASS and all its components in the original shipping carton.
(2 p. 2-3)
n
• Do not remove the BJ cartridge from the MultiPASS or ship a BJ cartridge or tank from
which you have removed the protective cap. An opened BJ cartridge or BJ tank that is
not installed in the MultiPASS or the BJ cartridge container may leak, and the print head
may dry out. Also, if you do not tape the BJ cartridge to the side of the MultiPASS, ink
may spill into the unit.
• If you no longer have the shipping carton your MultiPASS came in, pack the unit in a
suitably sized, sturdy cardboard box, and use bubble wrap or other suitable packing
materials. (If you use foam peanuts, be sure to wrap the MultiPASS in plastic first to
prevent the packing materials from entering any openings on the unit.)
12-20
Maintenance Chapter 12