Canon MultiPASS C755 User Manual page 204

Manual redialing
When you use regular dialing, you can redial a number "manually" by simply pressing
Redial/Pause. The last number dialed with the numeric buttons is the number redialed.
Memory broadcast
Allows you to send a scanned fax to as many as 113 destinations, using a combination
of one-touch speed dialing, coded speed dialing, and regular dialing.
Memory sending
Scans a document into memory before the MultiPASS dials the number(s) and sends it.
This method allows you to retrieve your document immediately after scanning.
Modem
A device that converts (MOdulates) digital data for transmission over telephone lines. At
the receiving end, this device converts the modulated data (DEModulates) to digital
format that the PC understands.
MultiPASS Suite software
Canon's exclusive software package that allows you to use the MultiPASS with your
Windows ® software applications. You must install the MultiPASS Suite to use your
MultiPASS as a printer, scanner, and PC fax.
N
Noise
A term applied to a variety of problems that impair the operation of telephone lines
used for faxing.
Noise level
See dB(A) .
Numeric buttons
The round, numbered buttons on the operation panel marked the same as a standard
telephone keypad. Press them to perform regular dialing. They are also used to enter
numbers, letters, and symbols when registering numbers and names, and for entering
two-digit codes for coded speed dialing.
O
Off-line
The printer's communication status in which you cannot transfer data from your PC to
the printer.
On-line
The printer's communication status in which it is being controlled by your PC and is
ready to receive data.
G-6
Glossary