Manual Sending - Canon MultiPASS C755 User Manual

Start
5
Press
or if you used speed dialing, wait a few
seconds for the MultiPASS to begin
scanning automatically.
• If you prefer the MultiPASS never to scan a
document automatically after a few seconds,
disable the TIME OUT setting. (1 p. 14-5)
• To cancel sending once dialing has started,
press Stop then T. (1 p. 7-9)
n
• You can scan up to 30 different documents for memory sending.
• When an error occurs during sending, the document is automatically deleted from
memory, even if it is not sent completely.
• If you attempt to send a color document to a fax machine that does not support color
faxing, the document will not be sent and the LCD will display TRY AGAIN IN B&W. Try
sending again in black & white. Alternatively, you can enable the COLOR DIRECT TX
setting (1 p. 14-5) that converts color faxes to black & white if the other party's fax
machine does not support color faxing.

Manual Sending

Manual sending allows you to talk to the other party before sending the document. This
method is useful if the other party must manually set their fax machine to receive
before they can receive a fax.
Follow this procedure for manual sending:
n
For this mode, you need to have a telephone connected to your unit. (1 p. 2-6)
1
Open the document tray.
2
Adjust the document feed lever for the
document you are loading. (2 p. 4-2)
3
Prepare the document and load it, face
down, in the ADF. (2 p. 4-3)
• For color sending, press Color/B&W to
turn on its light. (1 p. 7-2)
• To adjust the resolution and contrast,
1 pp. 7-2, 7-4.
Hook
4
Press
• You can also lift the handset of the telephone
connected to your unit instead of pressing
Hook.
Chapter 7
to begin scanning for sending,
.
MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
(Standby to scan)
TEL=
Sending Faxes
7-7