Loading Paper in the Multi-Purpose Tray
Load paper in the multi-purpose tray as follows:
1
Make sure the paper thickness lever is
set to p (up).
For details, 1 p. 5-6.
Raise the paper rest until stops q,
2
then move the paper guide to the left
to match the size of your paper w.
3
Prepare a stack of paper by fanning
the edge that will feed into the unit
first, and then tapping the stack on a
flat surface to even its edges.
4
Insert the stack into the multi-purpose
tray until it stops q, so that the right
edge of the stack is aligned with the
right side of the multi-purpose tray.
Slide the paper guide snugly against
the left edge of the stack w.
• The multi-purpose tray holds up to 100
sheets of 20 lb. (75 g/m
• Make sure the stack is below the paper limit
mark ( P ).
The MultiPASS is now ready to print.
Chapter 2
2
) plain paper.
1
2
1
2
PAPER LIMIT MARK
Setting Up
2-19