Canon MultiPASS C755 User Manual page 40

• Do not leave paper stacked in the multi-purpose tray for long periods of time since it
may bend or curl over time, and cause paper jams or misfeeding problems.
• Certain environmental conditions, such as extreme temperatures or humidity, can
cause some print media to misfeed in the multi-purpose tray. If you have trouble with
print media becoming skewed or multiple sheets being fed, do not stack them in the
multi-purpose tray, but feed them one sheet at a time.
• Depending on the density of the printed pages, the ink may need time to dry. Within
two or three seconds, the ink becomes smudge resistant. After drying for several
minutes, the ink becomes water-resistant.
• If your printed page contains a large amount of graphics, the ink on the page may be
damp due to the print density. Leave the page in the output tray for 30 to 60 seconds
to allow the ink to dry. Then remove the page being careful not to touch the document
tray (if it is open). Should you dirty the document tray when removing the page, wipe
it clean with a clean, soft, lint-fee cloth moistened with water or diluted dishwashing
detergent solution.
• Printing dense graphics on light paper stock may cause the paper to curl. Try using
heavier stock.
• If paper curls after printing, remove it immediately; otherwise paper jams may occur.
• The platen (a roller inside the unit) may become inked if you print data beyond the
width of the page. If this happens, clean the platen with a soft cloth. (1 Cleaning
Inside the Printer Cover , p. 12-2)
2-18
Setting Up Chapter 2