Mounting - Savant SmartControl 2 Deployment Manual

Wireless controller

Hide thumbs Also See for SmartControl 2:

Table of Contents

5. Mounting

Mount the controller in a place that is dry, well ventilated, and out of direct sunlight.

5.1. Mounting Plate Installation

The mounting plate included in the shipping box can mount the controller to a wall or existing structure. Follow instructions below to mount the

controller.

Place the mounting plate onto a wall so the tabs that hold the controller are oriented horizontally.

Mark on the wall the two mounting holes. Install wall anchors and screw the mounting plate to the wall.

Snap the controller into the bracket so the tabs on the bracket seat into the slots on the side of the controller.

5.2. Rack or Cabinet Installation

When mounting in a rack or cabinet, the controller should be set on a solid, flat, level surface.

SmartControl 2 Wireless Controller Deployment Guide

009-1519-00 | 170103

Table of Contents

Do you have a question about the SmartControl 2 and is the answer not in the manual?

Ssc-w002g-01