Contents Introduction ................... 4 Deployment Steps ................5 Super Pro Host Overview ..............6 Box Contents and Specifications ..............6 Rear Panel ........................6 Installation ....................7 Rack Installation....................... 7 Ethernet Connection ....................7 Audio Connection ....................8 AC Power Connection ................... 8 Blueprint Configuration ..............
Page 3
Important Safety Information - Read First Safety Statements Before installing, configuring and operating Savant equipment and other Follow all the safety instructions listed below and apply where vendor equipment, Savant recommends that each dealer, installer, etc. applicable. Additional safety information will be included where access and read all the required technical documentation.
Introduction This Deployment Guide will guide the installer through the process of installing, configuring, and adding a Savant Super Pro Host to a Blueprint configuration. Before You Begin Read through this document in its entirety and ensure that the following required items are available: Savant Super Pro Host (SVR-7000S) ..............................
2 Deployment Steps Follow these steps to successfully deploy a Savant Super Pro Host. This page can be used as a checklist to record which steps have been completed. Review product specifications ................................See Super Pro Host Overview Install the Super Pro Host ..................................
3 Super Pro Host Overview 3.1 Box Contents and Specifications Refer to the Quick Reference Guide for this product located on the Savant Customer Community for Box Contents and Specifications. 3.2 Rear Panel Case Lock Switch that will lock/unlock the case for removal.
4 Installation The Super Pro Host should be installed on a solid, flat, level surface such as a table, cabinet, or shelf. The location should be dry, well ventilated, and out of direct sunlight. 4.1 Rack Installation The RCK-7000 is available for rack installation.
Power Management Recommendations Savant recommends a pure sine wave uninterruptible power supply (UPS) with the ability to shut down the Savant Host before the battery runs out of power. Never remove power from the Savant Host before shutting it down.
The Super Pro Host supports the Audio Interrupt Service (AIS) which is used to interrupt the currently playing audio with a doorbell chime alerting the user that a doorbell has been pressed. This service requires a connection between the Pro Host and a Savant Audio Matrix or 3rd party audio matrix.
Device Network Connections Connect all Savant devices to the same local area network (LAN) or subnet as the host. Savant recommends not implementing any type of traffic or packet shaping in your network topology for the Savant devices as this may interfere with performance.
Page 12
Savant Systems, LLC. shall not be liable for any technical or editorial errors or omissions contained herein or for incidental or consequential damages resulting from the performance, furnishing, reliance on, or use of this material.
Need help?
Do you have a question about the Super Pro Host and is the answer not in the manual?
Questions and answers