Important Safety Information - Read First; Safety Statements - Savant SmartControl 2 Deployment Manual

Important Safety Information - Read First

Before installing, configuring, and operating Savant equipment and other
vendor equipment, Savant recommends that each dealer, installer, etc. access
and read all the required technical documentation. Savant technical
documentation can be located by visiting Savant.com. Vendor documentation
is supplied with the equipment.
Read and understand all safety instructions, cautions, and warnings in this
document and the labels on the equipment.
Safety Classifications In this Document
Provides special information for installing, configuring,
Note:
and operating the equipment.
Provides special information that is critical to
IMPORTANT!
installing, configuring, and operating the equipment.
Provides special information for avoiding situations
CAUTION!
that may cause damage to equipment.
Provides special information for avoiding situations
that may cause physical danger to the installer, end
WARNING!
user, etc.
Electric Shock Prevention
The source power poses an electric shock hazard that
ELECTRIC
has the potential to cause serious injury to installers
SHOCK!
and end users.
The source power outlet and power supply input
power sockets should be easily accessible to
ELECTRICAL
disconnect power in the event of an electrical hazard
DISCONNECT:
or malfunction.
Weight Injury Prevention
Installing some of the Savant equipment requires two
WEIGHT
installers to ensure safe handling during installation.
INJURY!
Failure to use two installers may result in injury.
SmartControl 2 Wireless Controller Deployment Guide
009-1519-00 | 170103

Safety Statements

Follow all the safety instructions listed below and apply where relevant.
Additional safety information will be included where appropriate.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip
over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15. To completely disconnect this equipment from the AC mains, disconnect
the power supply cord plug from the AC receptacle.
3 of 19
Copyright © 2018 Savant Systems, LLC