Introduction; Purpose; Contact Us; Reference Documents - Siemens ST950 Plus+ User Manual

ST950 Plus+ User Manual
I
NTRODUCTION
1

Purpose

The purpose of this handbook is to describe the procedures for the Installation and Commissioning
of the ST950 Plus system and to provide guidance on routine maintenance and fault finding.
+
This handbook has been created in accordance with the requirements of BS EN 12675:2001 and
BS 7987:2001.
Equipment Detail
Ongoing development means that some of the delivered items may differ in detail from the photographs
included in this handbook.

Contact Us

If you have any comments on this handbook, or need any further information, you can contact us
at support.ts.uk.mobility@siemens.com.

Reference Documents

1.3.1 Controller (Essential)
Publisher Reference Number
ITS 667/HB/46000/001
ITS 667/HB/46000/003
ITS 667/HB/46000/004
ITS 667/SU/46000/000
ITS 667/HB/46000/000
ITS 667/HH/46000/000
ITS 667/HU/46000/000
ITS 667/GA/53000/ETC
ITS 667/DZ/53000/000
1.3.2 Intersection Design
Publisher Reference Number
ITS 667/HQ/53000/200
ITS 667/HE/31699/000
ITS 667/HB/20168/000
ST950 Plus+ User Manual
Document Title
ST950 Facilities Handbook for ST950
MOVA 7 HANDBOOK - ST950
UTMC OTU Handbook for ST950 And Stratos Outstation
Use of ST950 Firmware and Hardware Configurations
ST950 Family General Handbook
ST950 Family Handset Handbook
ST950 User Interface Handbook
Plus + Top Level General Assembly
ST950 Plus + Family Tree
Document Title
ST950 Plus + Layout Design Tool Quick Start Guide
Loop Inductance and Turns Calculation Spreadsheet
IC4 Configurator Handbook
Page 8 of 176
667/HE/53000/000
Issue 2
Unrestricted