Configuration - Siemens ST950 Plus+ User Manual

ST950 Plus+ User Manual
S
L
S
L
2
2
Torpedo
joint
4
Plus+ Street Cable
from RAG Node
Torpedo
joint

Configuration

One of the fundamental changes, that has been brought about by Plus
a 1:1 link between outputs from a controller lamp switch card and the individual aspects. This link
is now achieved out on-street, between the Node and the aspect, push button or pedestrian
display unit.
In order to 'link' the functional design (IC4) and the on-street equipment a new layer of
configuration is required. It is known as the Plus
For Plus , the IC4 configuration is fundamentally unchanged, where the traffic junction
+
configuration (operation) is defined, terms of streams, phases, lamp monitoring and detector
inputs.
The Plus Design Layout Configuration now provides the link between the IC4 configuration and
+
the junction layout as designed – as opposed to wiring in a Lamp Switch Card.
Siemens Mobility has developed the Plus
KeySignals (KeySoft product). KeySignals provides a toolset for Traffic Engineers to design their
junctions within the AutoCAD product suit.
ST950 Plus+ User Manual
45m
X
X
2
4
Plus+ Street Cable from
Upstream Smartloop
Plus+ Loops
SmartLoop
Figure 9 : Smartloop Layout Example 4 : MOVA
Design Layout Tool, which works hand in hand with
+
Page 23 of 176
667/HE/53000/000
100m
2 2
Torpedo
joint
Plus+ Loops
SmartLoop
+
Design Layout Configuration.
+
IN
IN
2
Torpedo
joint
2
Loop Feeder
, is that there no longer is
Issue 2
Unrestricted