Re-Fit The Cabinet To The Stool - Siemens ST950 Handbook

Higher CET
Fixing Position
Lower CET
Fixing Position
Stud
Nut
CET Bar
CET Ring
(Earthing Band)
Earthing Band
667/2/02348/000
Figure 50 - Termination of Armoured Cable to CET bar

7.3.10 Re-fit the Cabinet to the Stool

If the controller cabinet was not installed with the mounting stool then it should be
done as follows:
Security classification
Version
Last Editor
Document Name
Copyright © Siemens plc 2020. All Rights Reserved.
Mounted at CET Lower Fixing Position
Cores
Ident
PLAN VIEW
Unrestricted
7
manpreet.jeerh
ST950 ICM Handbook
Mobility, Intelligent Traffic Systems
Sopers Lane, Poole, Dorset, BH17 7ER
SIDE VIEW
Inner Insulation
55mm
to
65mm
(Armouring not shown at
front of ring for clarity)
(Alternative position)
Incoming Cable
Page
Status
Date
Document No.
Mobility is a division of Siemens Plc
Hose Clip
Ident
Wormdrive Hose Clip
991/4/01375/028
95 of 154
Issued
January 2020
667/HE/45950/000