Lsls Outputs - Siemens ST950 Handbook

Each of the 32 outputs has an associated LED showing the status of that output.
The LED is tri-colour and should be the appropriate colour assigned to the output
(except during Self Test when all LED's illuminate yellow).

4.13.1 LSLS Outputs

The LSLS outputs can be configured to be lamp monitored. Typically, outputs that
drive Aspects, Pedestrian Waits, Pedestrian Red and Green Nearsides and
Demand/Wait Indicators can be lamp monitored. Outputs that drive Tactiles and/or
Security classification
Version
Last Editor
Document Name
Copyright © Siemens plc 2020. All Rights Reserved.
Figure 25 – LSLS Card and Backplane
Unrestricted
7
manpreet.jeerh
ST950 ICM Handbook
Mobility, Intelligent Traffic Systems
Sopers Lane, Poole, Dorset, BH17 7ER
Page
Status
Date
Document No.
Mobility is a division of Siemens Plc
57 of 154
Issued
January 2020
667/HE/45950/000