Connection To Systems Other Than Stratos - Siemens ST950 Handbook

Setting the profile to Stratos
Equipment is supplied configured for use in non-Stratos systems. To configure it for
use with Stratos, visit the System – Settings configuration web page and set the
Profile to Stratos.
7.4.7

Connection to Systems Other than Stratos

Security
When set to the Stratos profile and connected to Stratos only, the unit provides
suitable security to allow it to be connected to the Internet. If either of these
conditions is not met (i.e. the Stratos profile isn't selected and / or the unit is
connected to systems other than Stratos e.g. UTC systems) then a suitable analysis
should be performed to ensure that there are no security vulnerabilities in the
network configuration and / or equipment used. The details of this will depend on
the networks and connections involved and is outside the scope of this codument
but the following are examples of what should be considered:
Security classification
Version
Last Editor
Document Name
Copyright © Siemens plc 2020. All Rights Reserved.
Unrestricted
7
manpreet.jeerh
ST950 ICM Handbook
Mobility, Intelligent Traffic Systems
Sopers Lane, Poole, Dorset, BH17 7ER
Page
Status
Date
Document No.
Mobility is a division of Siemens Plc
107 of 154
Issued
January 2020
667/HE/45950/000