Table of Contents
Advertisement
On IP30 Tele (VPN client) add a VPN site.
Setting up IP30 Satellite
Configure a VPN Tunnel between an IP30 Tele and an IP30
Satellite.
To set up the IP30 Satellite
1. Add a User.
2. Enable VPN remote access for the user you added.
3. Enable the VPN Server.
IP30 Tele to Check Point v4.1/ NG/ FP1/
FP2
The IP30 Tele can be used as a VPN client to establish a VPN
connectivity with a Check Point server using version 4.1, NG, FP1,
FP2 or FP3.
Setting up IP30 Tele
Configure a VPN Tunnel between an IP30 Tele and an IP30
Satellite.
On IP30 Tele (VPN client) add a VPN site.
Setting up Check Point Server
Open the Check Point policy editor and select Firewall-1/ VPN -1
workstation object that will receive the Safe@VPN session request.
IP30 Tele to Check Point FP3
The IP30 Tele can be used as a VPN client to establish a VPN
connectivity with Check Point FP3 server using a Safe@gateway
Nokia IP30 User Guide
97
Advertisement
Table of Contents
