Logging On To A Vpn Site; Logging On Using Ip30 Gui - Nokia IP30 User Manual

4
VPN Configuration
4. Click OK.

Logging on to a VPN Site

If you chose automatic login, a VPN tunnel is created automatically
when you try to access the VPN site.
If you chose manual login, log on to a VPN site every time you
want to access the VPN site.
You can log on to a VPN site either through the Nokia IP30 GUI or
the my.vpn page. When you log on, a VPN tunnel is established.
Only the computer from which you logged on can use the tunnel.
To share the tunnel with other computers in your home network,
you must log on to the VPN site from those computers, using the
same username and password.
Note
You can use a single username and password for each VPN destination
gateway.

Logging On Using IP30 GUI

To log on to a VPN site using IP30 GUI, do the following:
1. Click VPN.
2. In the VPN submenu, click VPN Login.
3. Select the site you want to log on.
118
A confirmation message appears.
The VPN site is deleted.
The VPN Sites page appears, with a list of VPN sites.
The VPN Login page appears.
Nokia IP30 User Guide