Ip30 Front Panel - Nokia IP30 User Manual

1
Introduction
The items on the rear panel of the IP30 are explained in Table 1.
Table 1 Rear Panel of the IP30
Label
PWR
RESET
WAN
LAN 1-4

IP30 Front Panel

You can monitor the IP30 operations by viewing the LEDs on the
front panel. The Nokia IP30 includes 11 status LEDs.
Figure 2 Front Panel of Nokia IP30
18
Description
A power jack used for supplying power to the device.
Connect the power adapter to this jack. The device
connects to the power source.
Used to reboot/ reset the IP30 to its factory defaults.
Use a sharp object to press this button.
Short press: reboots IP30
Long press (7 seconds): resets the IP30 to its factory
defaults. This results in loss of all security services and
passwords.
DO NOT RESET UNIT WITHOUT CONSULTING
NOKIA SUPPORT.
An ethernet port (RJ-45) used to connect your cable or
xDSL modem.
Four Ethernet ports (RJ-45) used to connect
computers or other network devices.
Nokia IP30 User Guide