Managing Ip30 Firewall From A Remote Location - Nokia IP30 User Manual

2. Do one of the following:
a. Select Disabled to disable remote HTTPS capability.
b. To allow access to IP30 from a specific range of IP
Note
You can use HTTPS to access the IP30 from your internal network even if
remote HTTPS is disabled, by going to https://my.firewall.
c. To allow access to the IP30 from any IP address, select
Warning
If HTTPS is enabled, the IP30 settings can be changed remotely, so make
sure all IP30 passwords are difficult to guess.
3. Click Apply.
The HTTPS configuration is saved. You can now access IP30 from
a remote location through the Internet.
Managing IP30 Firewall from a Remote
Location
You can manage an IP30 from a remote location using a
Safe@object configured on Check Point SmartCenter FP3. The
Checkpoint Smart Dashboard has three profiles to manage Firewall
remotely they are "Low","Medium","High" and a pre-configured
"Hi-med-Low" profile.
They are derived from a Rule base and packaged together into a
single security policy which can be enforced onto the IP30.
Nokia IP30 User Guide
addresses, select Allow from this IP address range only
and enter the IP address range.
Allow from any IP address.
Managing Your Network
57