Running Diagnostics - Nokia IP30 User Manual

2. Click the Firmware tab.
The Firmware page appears.
3. Click on Restart.
A confirmation message appears.
4. Click OK.
The IP30 is restarted (the PWR/SEC LED flashes quickly) and the
following message appears.
The Login page appears.

Running Diagnostics

You can view technical information about IP30 hardware,
firmware, license, network status, and subscription services.
This information is useful for troubleshooting. You can copy and
paste it into the body an email and send it to technical support.
To run diagnostics
1. In the Navigation Bar click Setup.
The Internet page appears.
2. Click the Firmware tab.
The Firmware page appears.
3. Click Diagnostics.
Technical information about the IP30 appears in a new
window.
4. To refresh the contents of the window, click Refresh.
The contents are refreshed.
5. To close the window, click Close.
IP30
Frequently Asked Questions
133